Brand: OCEANLOVE

OCEANLOVE for MagSafe Wall Mount Adhesive Magnetic Waterproof Shower Phone Holder stand, with Flexible Reusable Sticker, No drill,Nails Free Installation,Built-in upgraded N52 super magnets,Rustproof Oilproof for iPhone 15 Pro Max Plus 14 13 12 and Magsafe Case for Mirror Shower Gym Tile Glass Bathroom Kitchen,Compatible with ALL other phone,case or Pad iPad by stick the metal ring (This item includes 1 free metal ring) on the back of them.<br><b>Tip: The holder DOES NOT have CHARGING function.</b><br>The joint ball of the mount has a diameter of 0.67 inch (17 mm) and is compatible with many others various clip for car phone holders thar their the joint ball is same diameter .<br><b>The phone screen can tilt downwards, so they can be installed at a height where the water sprayed by the shower head cannot reach, thereby avoiding getting soaked in water.</b><br>The phone case will increase the distance between the holder and the phone, significantly reducing the magnetic attraction force. Therefore, a thick NON MAGSAFE case will cause weak magnet. In this case, it is necessary to remove the phone case or use a phone case that supports MAGSAFE.

Features:

• [Flexible & Durable Oversized Transparent Stickers - No Nails Needed] This sturdy base uses large transparent self-Adhesive stickers for installation, so you don't need nails. The flexible material lets you easily squeeze out air bubbles during application for a stronger hold. Meanwhile, the transparency not only looks sleek but also lets you visually confirm proper adhesion. Compared to Other Mounts: Suction cups may slowly leak air without you knowing and suddenly detach. Opaque adhesive pads hide the weakening grip until they randomly pop off.
• [Powerful attachment of the phone by the strong N52 magnets(Not for charging)]For iPhone17 16 15 14 13 12 pro max mini phones and for Magsafe case, This Magnetic for magsafe phone holder stand can securely hold them(without phone case) directly, another phone or case need to stick the metal ring(This item includes 2 free metal ring)on the back of them. Easily placed and taken out with one hand, Easily adjust the phone vertically or horizontally for viewing.Tip: The holder DOES NOT have CHARGING function.
• [Waterproof, Rustproof, and Oilproof?Widely used] Once securely stuck, this holder withstands brief exposure to moderate temperature water splashes and is safe for greasy kitchen environments.It is widely used on a variety of smooth and hard surfaces like tile, glass, wood, board, slab,laminates, mirror, vinyl siding, stainless steel, metal, etc. at bathroom, kitchen, shower, office, bedroom,etc.Of course, you can also treat it as a wall heavy-duty hook.(Tip:Please do not use it on painted wall, wallpaper, poor wall and other rough or uneven surfaces,Otherwise it can not bear the weight and will damage the wall.)
• [Diameter 0.67inch (17mm?Joint Ball]The magnetic suction head is connected to the base through a joint ball,so the phone can rotate in all directions until the edge of the phone touches the wall.The joint ball of the mount has a diameter of 0.67 inch (17 mm) and is compatible with many others various clip for car phone holders(no included in this item) that their the joint ball is same diameter .
• ***[Temperature Requirements for Pasting]This sticker can work in the temperature range of 41? to 122 ??However, while pasting it, the recommended temperature is 68 ?,the minimum should not be lower than 50?.Otherwise, due to the low temperature, it will lose its adhesiveness,pasting cannot be done at this time
• .[Eassy to Use and Remove]Just clean and dry the wall,tear off the film on the back of sticker,place it on the wall and press the adhesion base fully and firmly, and then waited 12 hours before using it. To remove it,if it's pasted on the wall for a long time and not easy to peal off. We suggest you to blow hot air with hair drier to dissolve the glue, then it would be tore off easily and no trace.(TIP:Sticker may not be able to be stick again if they are already firmly attached.The sticker with the joint ball can be purchased in another listing.)
• ***[Temperature Requirements for Pasting]This sticker can work in the temperature range of 41? to 122 ??However, while pasting it, the recommended temperature is 68 ?,the minimum should not be lower than 50?.Otherwise, due to the low temperature, it will lose its adhesiveness,pasting cannot be done at this time.Its adhesiveness will only be restored when the temperature rises.

Product Details:

• Color: White
• Size: for MagSafe or 50mm+ diameter metal plate
• Model: MH-236
• Quantity: 0