Description
Brand: SKEZN
The chin assembly can be mounted on either side of the helmet's chin, front and rear of the helmet, or on the top of the helmet. The wrench in the package can be used to assist the set screw.
The helmet chin mount is with extension which can swivel 180º, so you can adjust to wide range angles, such as forward visibility, backward visibility and blind area.
This product uses a strong double-sided sticker that can be tightly attached to the helmet. Use the included safety buckle and attach it to the side to provide double protection for your action camera.
You can combine the J-hook mount with curved mount to use it on helmet or combine it with flat mount to use it on ski/skate/surf boards, kayak and so on. The sticky pad can be removed by peeling it off from the edge, or be removed cleanly after heating with the hair dryer.
HOW TO USE IT?
Step 1: Rip the double-sided tape onto the slide base.
Step 2: Adjust the bracket angle in advance and align the position where the helmet should be attached.
Step 3: Attach the bracket to the base.
Step 4: Hang the safety buckle at the camera and bracket interface.
Step 5: Attach the safety buckle to the other side of the chin.
Step 6: Install the camera and tighten the screws on the bracket with a wrench.
Specification:
Material: Plastic
Suitable for:GoPro Hero 13/12/11/10/9/8 Black,AKASO/Campark/Crosstour/APEMAN action camera, Xiaomi YI/4K,LD4000/6000,Sony Sports DV,etc.
Product Includes:
1*Motorcycle helmet chin mount
1*J-hook
2*Curved mounts
2*Flat mounts
10*Sticky pads
2*Screws
1*Safety rope buckle
1*Wrench
1*S-adapter
1*Release buckle
Note:
The camera and helmet are not included.
• ?Motorcyclist special product?Multi-functional Helmet Chin Mount Kit, designed for motorcyclists, a variety of accessories to support you to combine at will!
• ?Motorcycle helmet mount:?This helmet action cameras chin mount kit consists of 4 joints connected by screws.The screw can be adjusted so that you can rotate the joints, every joint can be rotated 180 degree. We give away a s-adapter to match your camera if there is a threaded hole at the bottom
• ?Specialized accessories in combination?This helmet mount kit for Gopro/DJI/AKASO providing best solution for motorcycle driver to record from top or side with best picked GoPro mount accessories
• ?Adhesive mount & sticky pads?The sticky holder of this kit for helmet chin mount is divided into two kinds: curved and flat, which can be used according to the specific situation. Industrial-strength waterproof sticky pads to help you mount your camera to your helmet.
• ?Safety rope buckle & wrench?You can install safety rope after installing the camera, it provides dual protection. The wrench can adjust all the screws except the screw which at the bottom, you need to use your own screwdriver
Color: Black
The chin assembly can be mounted on either side of the helmet's chin, front and rear of the helmet, or on the top of the helmet. The wrench in the package can be used to assist the set screw.
The helmet chin mount is with extension which can swivel 180º, so you can adjust to wide range angles, such as forward visibility, backward visibility and blind area.
This product uses a strong double-sided sticker that can be tightly attached to the helmet. Use the included safety buckle and attach it to the side to provide double protection for your action camera.
You can combine the J-hook mount with curved mount to use it on helmet or combine it with flat mount to use it on ski/skate/surf boards, kayak and so on. The sticky pad can be removed by peeling it off from the edge, or be removed cleanly after heating with the hair dryer.
HOW TO USE IT?
Step 1: Rip the double-sided tape onto the slide base.
Step 2: Adjust the bracket angle in advance and align the position where the helmet should be attached.
Step 3: Attach the bracket to the base.
Step 4: Hang the safety buckle at the camera and bracket interface.
Step 5: Attach the safety buckle to the other side of the chin.
Step 6: Install the camera and tighten the screws on the bracket with a wrench.
Specification:
Material: Plastic
Suitable for:GoPro Hero 13/12/11/10/9/8 Black,AKASO/Campark/Crosstour/APEMAN action camera, Xiaomi YI/4K,LD4000/6000,Sony Sports DV,etc.
Product Includes:
1*Motorcycle helmet chin mount
1*J-hook
2*Curved mounts
2*Flat mounts
10*Sticky pads
2*Screws
1*Safety rope buckle
1*Wrench
1*S-adapter
1*Release buckle
Note:
The camera and helmet are not included.
• ?Motorcyclist special product?Multi-functional Helmet Chin Mount Kit, designed for motorcyclists, a variety of accessories to support you to combine at will!
• ?Motorcycle helmet mount:?This helmet action cameras chin mount kit consists of 4 joints connected by screws.The screw can be adjusted so that you can rotate the joints, every joint can be rotated 180 degree. We give away a s-adapter to match your camera if there is a threaded hole at the bottom
• ?Specialized accessories in combination?This helmet mount kit for Gopro/DJI/AKASO providing best solution for motorcycle driver to record from top or side with best picked GoPro mount accessories
• ?Adhesive mount & sticky pads?The sticky holder of this kit for helmet chin mount is divided into two kinds: curved and flat, which can be used according to the specific situation. Industrial-strength waterproof sticky pads to help you mount your camera to your helmet.
• ?Safety rope buckle & wrench?You can install safety rope after installing the camera, it provides dual protection. The wrench can adjust all the screws except the screw which at the bottom, you need to use your own screwdriver
Color: Black
Additional Information
Delivery Information
Delivery Information
Swift, Secure, and Reliable Shipping
At craftedyogi.com, we understand how important fast and dependable delivery is when it comes to your electronics. Whether it's a gadget, accessory, or device, we are committed to providing a seamless and efficient shipping experience to ensure your electronics arrive safely and on time.
Our Shipping Process
Order Processing
As soon as you place your order, our dedicated team begins processing it promptly to ensure quick dispatch. We aim to ship all electronics within 2 business days of order confirmation, excluding weekends and holidays.
Secure Packaging
Your electronics are valuable, and we treat them with the highest level of care. Each item is carefully packed using high-quality, protective packaging materials to prevent damage during transit. We ensure your products arrive in excellent condition, ready to use.
Shipping Partners
We partner with reputable and trusted shipping carriers to guarantee safe and timely delivery. Once your order ships, you’ll receive a tracking number so you can monitor your package in real time and stay updated on its delivery status.
Transit Time
USA Shipping: 4–7 business days after dispatch.
Shipping Costs
We Offer free shipping for Domestic orders inside USA.
Delivery Support
Our customer support team is here to assist you every step of the way. If you have any questions about your order, shipping timelines, or tracking details, please feel free to contact us:
📧 Email: support@craftedyogi.com
We’re dedicated to ensuring your electronics reach you quickly and securely. Your satisfaction is our top priority.
Thank you for choosing craftedyogi.com for your electronics needs. We look forward to delivering innovation and convenience right to your doorstep. Unbox with confidence and enjoy your new technology!
Reviews
My Wishlist
Wishlist is empty.
Compare
Shopping cart






