Brand: JIAANDA

<b/><br/><b>1.Light source: 5050 RGB LED <b/><br/><b>2.LED Qty: 60pcs per meter <b/><br/><b>3.Brightness(MCD): R:200-385mcd; G:580-1050mcd; B:100-200mcd <b/><br/><b>4.Wave length (NM): R,620-625nm ; G,515-525nm ; B,455-465nm <b/><br/><b>5.Color order : RGB <b/><br/><b>6.The gray level: 256 <b/><br/><b>7.Color: full color (24-bit ) <b/><br/><b>8.View angle: 120° <b/><br/><b>9.Voltage: DC12V <b/><br/><b>10.LED Strip Width:LED Strip Width: IP30/ IP65 -10mm IP67 -12mm (Includes waterproof silicone sheath) <b/><br/><b>11.Power:0.1W~0.3W/LED Total :15W~45W (Not a fixed value) <b/><br/><b>12.Waterproof:IP30/IP65/IP67 .There is no double side tape on IP67. <b/><br/><b>Double side tape: IP30/IP65 <b/><br/><b>13.Recommend Power Supply: 12V10A 120W <b/><br/><b>14.FPCB board color: Black/White <b/><br/><b>15.Dimension: 1000x10x2.13mm <b/><br/><b>16.Life span: ?50000hrs <b/><br/><b>17.Light up 1 color?red or green or blue) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED <b/><br/><b>Note: <b/><br/><b>LED strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip's performance. In fact, ALL the LED strips on the market are manufactured in half-meter lengths. <b/><br/><b>The LEDs at the far end of the strip might be dimmer because of the added resistance and voltage drop that occurs during the current flows to that end of the strip. The solution is adding DC12V voltage every 16.4ft or 32ft according to the actual situation . <b/><br/><b>Using voltage DC12V , higher than 12V will destroy it. Please don't use the DC5V or DC24V power supply to power it .

• 1.Dual-Signal. Signal break-point continuous transmission. If one pixel is damaged, the following LEDs still work .SK6813 IC Built in 5050SMD.256 brightness display and 24-bit color display. One IC controls one LED .Every LED can be cut .Static effect, Chasing effect, special effect etc .256 brightness display and 24-bit color display.Pure Gold Wires better quality.Longer life, more stable quality
• 2.DC12V Individually addressable. DC5V SK6812 Upgrade, Comes with backup data. Maximum white brightness , 16.4ft no voltage drops.Ultra bright. 256 gray levels, 24 bits full-color display.Only support 12V power supply.Do not try DC5V DC24V power supply.
• 3.High-LED Quality, it made by copper bracket and 10 pure gold wires. Wide compatibility. It works with SP108E,SP105E,SP107E, K-1000C,Intelligent speech control etc .Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.Power adapter and controller need to be purchased separately
• 4.Easy installation.IP67 has no double side tape on it's back . It comes with screws and clips instead of the self-adhesive back tape. With 4-pin male connector and separated power/ground wires on both ends, which makes it easy to hook up each other and wire up for power.There is adhesive tape on IP30/IP65 LED strip's back, so you can stick it to the wall or other items conveniently as you like.
• 5.Comes with 4pin JST-SM connectors LED color change strip lights are widely used for anywhere you want, you can decorate your TV, diningroom, bedroom, cars, birthday party and any more, which can enrich your life and make your life colorful.1-year warranty, if you have any issues, please contact us without hesitation.

Color: Black PCB IP67