Brand: CTBAIER

This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home.
Bulb model: ELPLP57//V13H010L57
Working hours :3000-4000 hours
Warranty period :200 days
Bulb type: Projector Lamp Bulb with housing
Applicable model:For epson EB-440W EB-450W EB-450Wi EB-460 EB-460i EB-450WiEDU EB-460iEDU EB-460EDU

When to change projector bulbs:

When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.

How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete

Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us
2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb


• Compatible model:For epson EB-440W EB-450W EB-450Wi EB-460 EB-460i EB-450WiEDU EB-460iEDU EB-460EDU
• The simultaneous pursuit of high brightness, long life and good compatibility in the quality of projection bulbs is a common problem, but our engineers have solved these problems through long-term data collection and testing. With A new generation of A+ wicks, and is equipped with matrix light control, the brightness is 90% higher than that of ordinary wicks.
• The optimized burner design allows aging at any position, fully extending the life of the bulb, and the brightness will be slightly reduced after 4000 hours, which is longer than other products on the market and the output is longer and more stable.
• This product is a complete lamp module with a housing, which can be easily replaced after the projector is turned off. The installation is completed within 5 minutes without the need for professional operators.
• Ctbaier is a professional manufacturer and supplier of projection light sources. It has many years of industry experience. Each wick will undergo rigorous performance testing before leaving the factory. It is responsible for product description and 220-day warranty, and provides excellent 30-day unsatisfactory replacement and on any condition within 12 hours feedback, so you can use it safely and safely.