Brand: CTBAIER

This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home.
Bulb model: ELPLP67//V13H010L67
Working hours :3000-4000 hours
Bulb type: Projector Lamp Bulb with housing
Applicable model: For Epson EB-SXW11 EB-SXW12 EB-S02 EB-S11 EB-S12 EB-W02 EB-X100 EB-W12 EB-X02 EB-X11 EB-X12 EB-X14 EX3210 EX5210 EX7210 MG-50 MG-850HD PowerLite 1221 1261W VS 210 VS 310 VS 315W EX3210 EX5210 EX7210 EX6210 H430A H429A H428A H428B H428C H429B H429C H430B H430C H431A H432A H433A H431B H432B H433B H432C H433C VS210 VS310 VS315W EB-SXW12 EB-SXW11 EB-X12 EB-W12 EB-S02 EB-S11 EB-S12 EB-W02 EB-X02 EB-X11 EB-X14 EB-X15 EB-W110 EB-S110 EH-TW490C EH-TW480 HC710HD Megaplex MG-50 MG-850HD MG-850HD Powerlite X12+ S11 W12+ X14+ W11+ 1211 1261W 1221 710 600 500 moviemate 85HD

When to change projector bulbs:

When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.

How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete

Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us


• Compatible model: For Epson EB-X14 EX3210 EX5210 EX7210 MG-50 MG-850HD PowerLite 1221 1261W VS 210 VS 310 VS 315W EX3210 EX5210 EX7210 EX6210 H430A H429A H428A H428B H428C H429B H429C H430B H430C H431A H432A H433A H431B H432B H433B H432C H433C VS210 VS310 VS315W EB-SXW12 EB-SXW11 EB-X12 EB-W12 EB-S02 EB-S11 EB-S12 EB-W02 EB-X02 EB-X11 EB-X14 EB-X15 EB-W110 EB-S110 EH-TW490C EH-TW480 HC710HD Megaplex MG-50 MG-850HD MG-850HD X12+ S11 W12+ X14+ W11+ 1211 1261W 1221 710 600 500 moviemate 85HD.
• The simultaneous pursuit of high brightness, long life and good compatibility in the quality of projection bulbs is a common problem, but our engineers have solved these problems through long-term data collection and testing. With A new generation of A+ wicks, and is equipped with matrix light control, the brightness is 90% higher than that of ordinary wicks.
• The optimized burner design allows aging at any position, fully extending the life of the bulb, and the brightness will be slightly reduced after 4000 hours, which is longer than other products on the market and the output is longer and more stable.
• This product is a complete lamp module with a housing, which can be easily replaced after the projector is turned off. The installation is completed within 5 minutes without the need for professional operators.
• Ctbaier is a professional manufacturer and supplier of projection light sources. It has many years of industry experience. Each wick will undergo rigorous performance testing before leaving the factory. It is responsible for product description and 220-day warranty, and provides excellent 30-day unsatisfactory replacement and on any condition within 12 hours feedback, so you can use it safely and safely.