Brand: HUAREW

Model: HR-IIC-I2C

HUAREW IIC I2C Logic Level Converter Bi-Directional Module

Specifications:
Channel: 4 channle
Voltage: 5V, 3.3V
Size: 0.63 x 0.55 inch
Characteristic:
1.Compatible with breadboard, can be directly use in breadboard
2.It can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage
3.Support four MOS tubes to achieve four-way 3V and 5V level bidirectional conversion
4.Support bidirectional conversion of 3V to 5V level of UART, IIC,1 wire, SPI and other signals
5.With power indicator, The power input has anti reverse connection protection, can provide no more than 150mA current

Channels Instruction
LV (Low Voltage): LV represents the low voltage side or the side of the circuit that operates at a lower voltage level.
HV (High Voltage): HV represents the high voltage side or the side of the circuit that operates at a higher voltage level.
GND (Ground): GND represents the ground or common reference voltage for both the low voltage (LV) and high voltage (HV) sides.

Packaging includes:
12 pieces IIC I2C Logic Level Converter Bi-Directional Module

NOTE:
This product is a level conversion module, not a power conversion module. It must be connected to a 5V power supply to work normally


• Each level shifter is capable of converting 4 pins on the high side to 4 pins on the low side and provides 2 inputs and 2 outputs for each side
• Logic level converter steps down 5V signals to 3.3V and steps up 3.3V to 5V, guaranteeing uninterrupted data transmission and enhanced signal integrity for your projects
• You can successfully set your high and low voltages and step up and down between them safely on the same channel
• This level converter also works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage
• The board needs to be powered from the high voltage and low voltage that your system is using. High voltage (5V) to the HV pin, low voltage (3V) to LV, and ground from the system to the GND' pin