Works great for the stupid recessed USB-C port on Razer Pro Click V2 Vertical Edition. I add magnetic chargers to all my accessories to make it easy to snap charging on and off, and this mouse made that impossible because the port was recessed so far that the round magnet end couldn't fit and so the USB-C end couldn't reach. This extended it out (a little further than necessary, but it's fine).

Works great for the stupid recessed USB-C port on Razer Pro Click V2 Vertical Edition. I add magnetic chargers to all my accessories to make it easy to snap charging on and off, and this mouse made that impossible because the port was recessed so far that the round magnet end couldn't fit and so the USB-C end couldn't reach. This extended it out (a little further than necessary, but it's fine).

I bought this for my Samsung-Galaxy S25+ with my Razer Kishi Ultra mobile controller.My problem was the Protective Case on my phone was too thick for the USB-C on the controller to insert into the Phone. It was a hassle having to remove the phone case every time I wanted to play. So I bought these extenders and they worked perfectly!Of course, because it's an extender, it does stick out a bit. Not that it's a flaw or anything, the controller wasn't particularly designed with an extension in mind.As long as I'm not rough with it, it should hopefully not break off and snap the USB ports.Aside from that, I'm a happy customer!

As stated, I've been looking for a solution to the problem of how to supply power to my Huion Kamvas 13 Gen3 drawing tablet, which only accepts 5v 2a thru the recessed USB-C port, but most USB-C cables are too bulky to fit there. I didn't want to be tied down to one specific cable, and it's always the cable that wears out first, so I looked into getting an adapter like this. Thanks to another review on this listing saying that it fits the drawing tablet I recently got, I decided to try this product out, and I can happily report that the port extender provided fits very well into the recessed USB-C port that supplies power to the drawing tablet. It even looks good doing it! Now I don't have to be tied down to only buying the Huion proprietary cable, and I can do that in a way that is *mostly* compatible with the USB standards laid down by USB-IF (this adapter is not specifically standards compliant because it does not have an ID chip in it, but this is how it has to be since the things on both ends can only ever read one ID chip from one cable, meaning that extenders and adapters such as this are forced to omit the ID chip in order to remain "invisible" to the controllers on both ends). Anyways, now I can use any fast-charging USB cable I want as long as I put this port extender in line with the recessed port. The adapter does fit *very* snugly, but this is a good thing because it means that the plastic that forms the recess for the deep-set USB-C port is what will take any load from the cable, rather than the circuit board the port is soldered to inside the tablet. Because of this snug fit, I will advise that anyone who is having connection issues with this port extender to first try pushing the extender into the port more firmly, with roughly 5 pounds force (2kgf is close enough if you use metric, since there's 2.2 pounds to the kilogram). Once the adapter is fully seated, it should cause zero issues for you, it does not change pinouts, it does not have any pull down or pull up resistors, it is basically "just a dumb piece of wire" as far as the electronics on both ends are concerned, and that's a good thing. Seems durable enough to last a long time, but time will tell. Even if not, it's inexpensive enough that buying replacements isn't a huge deal.

As stated, I've been looking for a solution to the problem of how to supply power to my Huion Kamvas 13 Gen3 drawing tablet, which only accepts 5v 2a thru the recessed USB-C port, but most USB-C cables are too bulky to fit there. I didn't want to be tied down to one specific cable, and it's always the cable that wears out first, so I looked into getting an adapter like this. Thanks to another review on this listing saying that it fits the drawing tablet I recently got, I decided to try this product out, and I can happily report that the port extender provided fits very well into the recessed USB-C port that supplies power to the drawing tablet. It even looks good doing it! Now I don't have to be tied down to only buying the Huion proprietary cable, and I can do that in a way that is *mostly* compatible with the USB standards laid down by USB-IF (this adapter is not specifically standards compliant because it does not have an ID chip in it, but this is how it has to be since the things on both ends can only ever read one ID chip from one cable, meaning that extenders and adapters such as this are forced to omit the ID chip in order to remain "invisible" to the controllers on both ends). Anyways, now I can use any fast-charging USB cable I want as long as I put this port extender in line with the recessed port. The adapter does fit *very* snugly, but this is a good thing because it means that the plastic that forms the recess for the deep-set USB-C port is what will take any load from the cable, rather than the circuit board the port is soldered to inside the tablet. Because of this snug fit, I will advise that anyone who is having connection issues with this port extender to first try pushing the extender into the port more firmly, with roughly 5 pounds force (2kgf is close enough if you use metric, since there's 2.2 pounds to the kilogram). Once the adapter is fully seated, it should cause zero issues for you, it does not change pinouts, it does not have any pull down or pull up resistors, it is basically "just a dumb piece of wire" as far as the electronics on both ends are concerned, and that's a good thing. Seems durable enough to last a long time, but time will tell. Even if not, it's inexpensive enough that buying replacements isn't a huge deal.

I recently purchased a gimble for my phone. I also bought a little wireless microphone set that plugs in via the USBC jack. with my case on my phone, they wouldn't plug in all the way. this was just enough to get things all plugged together and working. very helpful little piece.

Good cable. As advertised.

Adapters wok well.

Nice small USB-C extenders. Needed one of these for a new security camera that I use a small solar panel to charge. The charging port for it is recessed and to help hide the cable I wanted to use a 90 degree USB-C adapter that I had so the cable would point to toward the back of the camera toward the cable concealer and stay close to the camera to stay out of the way. But the adapter was too short to plug in and clear the bottom so with this it provided the length for the 90 adapter to be used. It worked great.

This fit my iPhone 15 Pro Max with OtterBox Defender XT case perfectly. This allows me to use my Hollyland Lark Max 2 USB-C RX which doesn’t fit with my case installed. I have verified connection at 40Gbps through WhatCable on MacOS. Power/charging works as advertised.

I have a few high end USB cables with larger grip areas on the ends and a couple of devices with very small, inset USB ports. Now I can get any cable in there to charge and/or transfer data.

Needed to extend out of my thick phonecase, gets the job done

Cable Matters quality! Works well.

These are great, just don't sit on them with your phone in your pocket. I have suffered two casualties this quarter. Luckily the piece of tech I've been adapting has survived.

These are great, just don't sit on them with your phone in your pocket. I have suffered two casualties this quarter. Luckily the piece of tech I've been adapting has survived.

It works to connect my Topdon TC001 thermal imaging camera to my Samsung Galaxy S25 with the phone's protective case on. I would still support the camera so that it doesn't fall off from the bottom of the phone.

It works to connect my Topdon TC001 thermal imaging camera to my Samsung Galaxy S25 with the phone's protective case on. I would still support the camera so that it doesn't fall off from the bottom of the phone.

Works perfectly as a USB-C extender. I own an Otterbox Defender case and one of my new products I bought, the usb-c end is too short to fit into the port. These Cable Matters USB-C extenders fit in the opening perfectly, giving me enough room to connect my new device to my phone. These also work great if you have tight USB-C ports on your computer too.

Works perfectly as a USB-C extender. I own an Otterbox Defender case and one of my new products I bought, the usb-c end is too short to fit into the port. These Cable Matters USB-C extenders fit in the opening perfectly, giving me enough room to connect my new device to my phone. These also work great if you have tight USB-C ports on your computer too.

They work

These items work sporadically and I would recommend going to a different manufacturer although I've used cable matters for years, this product just had poor development I guess

They work

Clear audio works as advertised easy to use

Clear audio works as advertised easy to use

This lets me connect devices to my phone with rugged case.