{"product_id":"nitrip-conversion-module-1-3khz-0-10v-pwm-signal-to-voltage-converter-module-digital-analog-board","title":"Nitrip Conversion Module, 1-3KHZ 0-10V PWM Signal to Voltage Converter Module Digital Analog Board","description":"Brand: NITRIP\u003cbr\u003e\u003cbr\u003eModel: NITRIP9mg3qevcha\u003cbr\u003e\u003cbr\u003eSpecification:\u003cbr\u003e Condition: brand new and high quality\u003cbr\u003e Current: M a x. 12mA\u003cbr\u003e Power supply input voltage: 12-30V\u003cbr\u003e Size: Approx. 5 x 4.5cm \/ 1.97 x 1.77inch\u003cbr\u003e Weight: 20g\u003cbr\u003e Quantity: 1pc\u003cbr\u003e \u003cbr\u003e Using method:\u003cbr\u003e PWM input frequency range: 1KHZ-3KHZPWM input level range:4.5V to 10V p e a k to p e a k level, jumper inserted at 5V. This type mainly for conventional industrial control card (such as for MACH3 board), for 5V the CPU interface.12 to 24V p e a k to p e a k level, jumper inserted at 24V. This type mainly for conventional PLC interface\u003cbr\u003e 0-10V analog voltage output explanation:\u003cbr\u003e When the input port is not connected, the output port gives 0V. The first time when we power on this module, we better calibrate it: find a 50% duty ratio , connect to DIN-, DIN+, the amplitude matches corresponding jumper. When frequency is at 1kHz ~ 3kHz, use a multi-meter to test AO, GND. The meter should be showing around 5.4V. We adjust the potentiometer on the converter module to make multi-meter shows about 5.4V. After this is done, we have calibrated and matched pulse with this converter module.  The module has a definition of 0.1V. Output current 10mA. If duty ratio is in opposite to voltage, we can select PWM output pin STEP LOW \/ ACTIVE for MACH3 software.\u003cbr\u003e \u003cbr\u003e Package Included:\u003cbr\u003e 1 x PWM to Voltage Converter \u003cbr\u003e \u003cbr\u003e Note:\u003cbr\u003e After power-up, when there is no input , the output is 0V. There is output only when there is input.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e• 【Specification】Weight: 20g, Size: 5 x 4.5cm \/ 1.97 x 1.77inch.\u003cbr\u003e• 【Main Funtion】PWM converts digital into analog (0 to 10V).\u003cbr\u003e• 【Features】Input digital can be 5V or 24V level 0-100% PWM signal. Output analog can be 0-10v voltage or 0-5v voltage.\u003cbr\u003e• 【Application Occasions】Can be used for industrial control panel PLC or other interface switching.\u003cbr\u003e• 【Easy Operate】This module is easy to wire and convenient to use.","brand":"NITRIP","offers":[{"title":"Default Title","offer_id":51602594496794,"sku":"MCAB07ZJNDS77","price":26.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/6772\/2266\/files\/71j6jNzxM7L.jpg?v=1768805354","url":"https:\/\/craftedyogi.com\/products\/nitrip-conversion-module-1-3khz-0-10v-pwm-signal-to-voltage-converter-module-digital-analog-board","provider":"Craftedyogi","version":"1.0","type":"link"}