{"product_id":"fainwan-vl53l0x-time-of-flight-flight-distance-measurement-sensor-breakout-vl53l0x-tof-laser-range-finder-compatible-with-ar-duino-rasp-berry-pi","title":"FainWan VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder Compatible with Ar-duino Rasp-Berry Pi","description":"Brand: FainWan\u003cbr\u003e\u003cbr\u003e\u003cp\u003eVL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout for Ar-duino\u003cbr\u003e Descriptions:\u003cbr\u003e Ranging measurements are available through the sensors I²C (TWI) interface, which is also used to configure sensor settings, \u003cbr\u003e and the sensor provides two additional pins: a shutdown input and an interrupt output.\u003cbr\u003e The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. \u003cbr\u003e It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V.Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.\u003cbr\u003e \u003c\/p\u003e\u003cp\u003e \u003cbr\u003e \u003c\/p\u003e\u003cp\u003ePIN Description\u003c\/p\u003e VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, \u003cbr\u003e you can instead use this pin as a 2.8 V input with VIN disconnected.)\u003cbr\u003e VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.\u003cbr\u003e GND The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.\u003cbr\u003e SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V\u003cbr\u003e SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V\u003cbr\u003e XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low\u003cbr\u003e puts the sensor into hardware standby. This input is not level-shifted. \u003cbr\u003e \u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003ePackage included:\u003c\/p\u003e 1* VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout for Ar-duino\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e• Advantage: A time-of-flight ranging system integrated into a compact module\u003cbr\u003e• Strong point: A carrier for the VL53L0X\u003cbr\u003e• Accuracy: Range from ±3% at best to over ±10% in less optimal conditions\u003cbr\u003e• Maximum Sensoring Distance: 2m\u003cbr\u003e• Working Voltage: 2.6V - 5.5V","brand":"FainWan","offers":[{"title":"Default Title","offer_id":51859750125850,"sku":"MCAB09LM62Z8Q","price":24.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/6772\/2266\/files\/617gu48OYVL.jpg?v=1774270112","url":"https:\/\/craftedyogi.com\/products\/fainwan-vl53l0x-time-of-flight-flight-distance-measurement-sensor-breakout-vl53l0x-tof-laser-range-finder-compatible-with-ar-duino-rasp-berry-pi","provider":"Craftedyogi","version":"1.0","type":"link"}