Zoom
Description
Brand: ZMSTLAMP
Why can you choose to trust us?
Because Zmstlamp is pursuing higher-quality projection lamps, it adopts a new generation of upgraded A+ wicks and is equipped with high-performance matrix light control, which greatly extends the actual service life and increases the brightness to 90%, which is brighter than other ordinary projection lamps on the market. The service life is longer, and each product will undergo rigorous calibration and testing before it is sent out, which can achieve the best output of brightness and color. The high quality of the product is guaranteed, so you have no worries about your choice.
When to replace the projection lamp:
When the indicator light on the projector panel starts to flash orange, or the projected image is darker and blurry than before. When the projector is turned on, a message to replace the lamp appears on the image. In order to get a better projection effect, it is recommended that you replace the projection lamp.
How to replace the projector bulb:
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down sufficiently.
3. Use a screwdriver to remove the screws on the cover, slide the lamp cover, and loosen the two screws that fix the bulb.
4. Pinch the lamp holder and pull it straight out.
5. Operate the steps in reverse order. Install the purchased Zmstlamp lamp back into the projector and tighten the screws.
6. Install the lamp cover and reset the lamp usage time.
Matters needing attention:
1. To avoid burns, the projector needs to cool down for at least 60 minutes before replacing the projector lamp.
2. You can consult us if you have any questions, and we will do everything we can to satisfy you, provide you with a 180-day warranty and a 30-day money-back guarantee, without any conditional feedback within 12 hours, so that you have no worries about your choice.
• COMPATIBLE MODULES: for Epson PowerLite Home Cinema 1080 1080UB 720, PowerLite PC 1080 PC 1080UB HC 1080 HC 1080UB HC 720 PC 810, EMP-TW1000 EMP-TW2000 EMP-TW700 TW980 Projector Lamp
• The new generation optimized wick design has better brightness, durability, and stability. Can be used for about 5000 hours, with a brightness increase of over 90%
• In pursuit of higher quality, the bulb is installed in a high-quality high-temperature-resistant housing, which is safe to use and easy to install. It can be easily replaced when the projector is turned off, just like taking out an old lamp, exactly matching
• Each product has undergone 100% performance testing before leaving the factory to ensure that each product can run with high performance and is brighter and more reliable than other ordinary projector bulbs on the market
• Zmstlamp is a professional manufacturer and supplier of projection light sources. We will provide you with a 180-day warranty and a 30-day money-back guarantee, without any conditional feedback within 12 hours, we will do everything we can to make you satisfied. Make your choice without any worries
Why can you choose to trust us?
Because Zmstlamp is pursuing higher-quality projection lamps, it adopts a new generation of upgraded A+ wicks and is equipped with high-performance matrix light control, which greatly extends the actual service life and increases the brightness to 90%, which is brighter than other ordinary projection lamps on the market. The service life is longer, and each product will undergo rigorous calibration and testing before it is sent out, which can achieve the best output of brightness and color. The high quality of the product is guaranteed, so you have no worries about your choice.
When to replace the projection lamp:
When the indicator light on the projector panel starts to flash orange, or the projected image is darker and blurry than before. When the projector is turned on, a message to replace the lamp appears on the image. In order to get a better projection effect, it is recommended that you replace the projection lamp.
How to replace the projector bulb:
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down sufficiently.
3. Use a screwdriver to remove the screws on the cover, slide the lamp cover, and loosen the two screws that fix the bulb.
4. Pinch the lamp holder and pull it straight out.
5. Operate the steps in reverse order. Install the purchased Zmstlamp lamp back into the projector and tighten the screws.
6. Install the lamp cover and reset the lamp usage time.
Matters needing attention:
1. To avoid burns, the projector needs to cool down for at least 60 minutes before replacing the projector lamp.
2. You can consult us if you have any questions, and we will do everything we can to satisfy you, provide you with a 180-day warranty and a 30-day money-back guarantee, without any conditional feedback within 12 hours, so that you have no worries about your choice.
• COMPATIBLE MODULES: for Epson PowerLite Home Cinema 1080 1080UB 720, PowerLite PC 1080 PC 1080UB HC 1080 HC 1080UB HC 720 PC 810, EMP-TW1000 EMP-TW2000 EMP-TW700 TW980 Projector Lamp
• The new generation optimized wick design has better brightness, durability, and stability. Can be used for about 5000 hours, with a brightness increase of over 90%
• In pursuit of higher quality, the bulb is installed in a high-quality high-temperature-resistant housing, which is safe to use and easy to install. It can be easily replaced when the projector is turned off, just like taking out an old lamp, exactly matching
• Each product has undergone 100% performance testing before leaving the factory to ensure that each product can run with high performance and is brighter and more reliable than other ordinary projector bulbs on the market
• Zmstlamp is a professional manufacturer and supplier of projection light sources. We will provide you with a 180-day warranty and a 30-day money-back guarantee, without any conditional feedback within 12 hours, we will do everything we can to make you satisfied. Make your choice without any worries
Additional Information
Delivery Information
Delivery Information
Swift, Secure, and Reliable Shipping
At craftedyogi.com, we understand how important fast and dependable delivery is when it comes to your electronics. Whether it's a gadget, accessory, or device, we are committed to providing a seamless and efficient shipping experience to ensure your electronics arrive safely and on time.
Our Shipping Process
Order Processing
As soon as you place your order, our dedicated team begins processing it promptly to ensure quick dispatch. We aim to ship all electronics within 2 business days of order confirmation, excluding weekends and holidays.
Secure Packaging
Your electronics are valuable, and we treat them with the highest level of care. Each item is carefully packed using high-quality, protective packaging materials to prevent damage during transit. We ensure your products arrive in excellent condition, ready to use.
Shipping Partners
We partner with reputable and trusted shipping carriers to guarantee safe and timely delivery. Once your order ships, you’ll receive a tracking number so you can monitor your package in real time and stay updated on its delivery status.
Transit Time
USA Shipping: 4–7 business days after dispatch.
Shipping Costs
We Offer free shipping for Domestic orders inside USA.
Delivery Support
Our customer support team is here to assist you every step of the way. If you have any questions about your order, shipping timelines, or tracking details, please feel free to contact us:
📧 Email: support@craftedyogi.com
We’re dedicated to ensuring your electronics reach you quickly and securely. Your satisfaction is our top priority.
Thank you for choosing craftedyogi.com for your electronics needs. We look forward to delivering innovation and convenience right to your doorstep. Unbox with confidence and enjoy your new technology!
Reviews
My Wishlist
Wishlist is empty.
Compare
Shopping cart